Configurable AC charging for residential, workplace and fleet installations.
Current rating varies by regional configuration. Available configurations vary by region, supply phase, connector type and applicable compliance requirements.
KM3-02 is a configurable Mode 3 AC charging solution, not a fixed SKU. Build your specification in six steps — or simply tell us your market and project type and we will recommend a configuration.
GB / EU / US compliance and local electrical requirements.
7 / 11 / 22 kW — availability depends on regional supply conditions.
Type 2, GB/T, Type 1 and NACS options.
Plug & Play, RFID or App Control.
Wi-Fi, Bluetooth, 4G, Ethernet and OCPP options.
Boot-up logo, nameplate, front panel, packaging label and user manual.
KM3-02 is engineered for permanent installation — hardwired power, wall-mounted housing and access control for shared use.
Permanently wired Mode 3 AC EVSE. Electrical installation configuration varies by region and must follow local electrical codes — installation by a qualified electrician.
Standard 4.3-inch LCD shows real-time charging status, energy and session data — clearly readable on the wall, day or night.
RFID card start/stop is standard. Control who can charge at private, workplace and shared installations.
IP65-rated enclosure for outdoor walls, carports and parking areas, operating from −25°C to +50°C.
Connectivity is specified per project — nothing is forced into every unit.
Available by configuration — select what your project needs.
Connectivity modules are optional and vary by configuration; they are not standard on every unit.
Optional OCPP 1.6 / 2.0.1 connectivity for compatible charge point management systems.
When connected to a compatible CMS, KM3-02 supports remote monitoring, firmware updates and centralised management across charging points. Confirm OCPP availability for your selected configuration with your quotation.
Select the connector that matches the vehicles in your target market.
Available connector and power combinations vary by regional configuration and applicable requirements.
Charging power and current ratings depend on the regional configuration and local power supply. This table is the reference for what each market configuration supports.
| China (GB) | Europe (EU) | North America (US) | |
|---|---|---|---|
| Reference Standards | GB/T 18487 | EN 62752 | UL 2594 / UL 2231 |
| Input Voltage Range | 1-ph 90–265 V · 3-ph 340–460 V | 1-ph 90–265 V · 3-ph 340–460 V | 1-ph 90–265 V AC |
| Frequency | 50 Hz | 50 Hz | 60 Hz |
| Maximum Current | 16 / 32 A | 16 / 32 A | 32 / 40 / 48 A |
| Maximum Charging Power | 7 / 11 / 22 kW | 7 / 11 / 22 kW | 7 / 9.6 / 11.5 kW |
Current rating varies by regional configuration. Regional compliance reference varies by selected configuration. Specifications are indicative and subject to change without notice.
Series capabilities first. Per-configuration details are confirmed with your quotation.
| Product Type | Mode 3 Wall-mounted AC EV Charger |
| Product Model | KM3-02 |
| Charging Power | 7 / 11 / 22 kW options — varies by regional configuration |
| Charging Current | Varies by regional configuration (see Power & Regional Configuration) |
| Display | Standard 4.3-inch LCD Display |
| Start Mode | Plug & Play / RFID standard / App Control optional |
| Connectivity | Wi-Fi & Bluetooth / 4G / Ethernet optional |
| Vehicle Connector | Type 2 / GB/T / Type 1 / NACS |
| Charging Cable | 5 m standard, customisable |
| Ingress Protection | IP65 |
| RCD | Type A RCD standard; Type B RCD / CCID 20 optional |
| Operating Temperature | −25°C to +50°C |
| Relative Humidity | 5%–95% RH, non-condensing |
| Maximum Altitude | ≤ 2,000 m above sea level |
| Net / Gross Weight | 4.5 kg net / 5.5 kg gross |
| Main Dimensions | 330 × 192 × 102 mm (L × W × H) |
| Package Dimensions | 500 × 280 × 230 mm (L × W × H) |
Request the datasheet, applicable documentation and packaging information for your target market and selected configuration.
Safety functions are available by configuration. Confirm the applicable specification for your target market.
Type A RCD is standard; Type B RCD and CCID 20 are optional and depend on the selected configuration.
A permanent home charging point for private driveways and garages, with RFID access control.
Managed charging for employees and visitors, with access control and optional network management.
Connect to a compatible CMS via OCPP for remote monitoring and centralised control of small fleets.
Sell KM3-02 under your own brand.
Boot-up Logo on Display
Nameplate Logo Customization
Front Panel Customization
Packaging Label Customization
User Manual CustomizationConfigure KM3-02 for your brand, target market and project channel. OEM availability, MOQ and lead time are confirmed according to the selected configuration.
Tell us your target market, required power, vehicle connector, connectivity needs and expected quantity. Our team will recommend a suitable configuration and prepare a quotation.
Yes. KM3-02 is a Mode 3 wall-mounted AC EVSE for permanent hardwired installation by a qualified electrician, in accordance with local electrical codes and project requirements. It is not a plug-and-play socket device — the electrical installation configuration varies by region.
It depends on the vehicle’s on-board charger and the local power supply. 7 kW single-phase suits most residential circuits, while 11 kW and 22 kW require a three-phase supply and a vehicle that supports three-phase AC charging. In North America, single-phase configurations cover 7 / 9.6 / 11.5 kW. Tell us your market and we will recommend the right option.
Type 2 is the standard connector in Europe, GB/T is used in China, and Type 1 and NACS are common in North America. If you serve several markets, mixed orders with different connectors can usually be arranged — let us know your requirements.
No. OCPP 1.6 / 2.0.1 connectivity is optional and depends on the selected configuration, as do Wi-Fi, Bluetooth, 4G and Ethernet modules. When connected to a compatible charge point management system, KM3-02 supports remote monitoring, firmware updates and centralised management.
Yes. OEM and white-label options include boot-up logo on the display, nameplate and front panel customization, packaging labels and customized user manuals. OEM availability, MOQ and lead time are confirmed according to the selected configuration.
No. Available configurations vary by region, supply phase, power rating, connector type and applicable compliance requirements — for example, maximum current ratings differ between the GB/EU and US regional configurations. See the Power & Regional Configuration table above or contact us for a market-specific recommendation.
